Locksmith Norwich, Lock Fitting

Number One For Lock Fitting Locksmith In Norwich

How To Fit A Mortice Lock Locksmith Norwich

A simple Mortie lock can be an effective burglary deterrent. Our Locksmith Norwich expert shows how to fit a mortice lock to protect your property.

You will need

1 battery drill some drill bits, most importantly flat woodcutting bits 1 mortice lock kit which includes: 1 lock body and key 1 strike plate 1 face plate 1 key cover some screws 1 chisel 1 tape measure 1 pencil 1 hammer some masking tape some sandpaper 1 dustpan and brush in case of any mess

1. Step 2: Mark the lock position

   Decide on a height for your lock. Hold the lock flat against the door edge at your chosen height, and draw around it with your pencil. Use your tape measure to find the centre point on the side of the door. Mark it with a pencil and draw a longer vertical line through the point.

2. Step 3: Select a drill bit

   Select a flat drill bit that is roughly 2mm or 1/16th inch thicker than the lock body. This will ensure a comfortable fit. Hold the lock against the drill bit. Use the masking tape to mark the depth of the lock on the bit, and attach it to the drill.

3. Step 4: Drill

   Before you start drilling, remember your drill safety. Put on your goggles. Make sure all loose items of clothing, jewellery and hair are tucked away. Clear the area of any potential hazards and find a steady standing position. Safety first for a Locksmith in Norwich
   You may want to wedge the door open to help steady your drilling.
   
   Start just beneath your top pencil mark and drill a series of overlapping holes down to your bottom pencil outline. Drill to the depth marked and take care to keep the bit horizontal and square to the door edge.

4. Step 5: Straighten up the edges

   Before you pick up your chisel, remember your chisel safety. Make sure that you are wearing safety goggles and clear the area of potential hazards. Find a steady position and remember to watch your fingers when you do start chiseling. If your not carfeul you'll be a three fingered locksmith in Norwich. 
   
   Firstly clear out any wood chippings with the chisel. Then use your chisel to tidy up the edges of the mortice recess so that the mortice will fit. Keep the flat edge of the chisel facing outwards as you work and chisel to the depth of the recess. Scrape out any woodchips.

PT Lock & Safe Lock Fitting Locksmith In Norwich

5. Step 6: Mark the face plate

   Now slide the lock into the recess and place the face plate over it. Draw around it.

6. Step 7: Make a recess for the face plate

   Begin by making a series of cuts on the edges of your pencil outline. Now chisel out the rest of the recess. Be careful, because if you chisel out too large a recess, it will be difficult to correct.
   If you don't feel confident contact your local locksmith in Norwich.
   Keep testing the fit to see that the face plate lies flush with the door.

7. Step 8: Mark the key holes

   Hold the lock against the face of the door so that the plate is flush with the door edge. Mark through the key hole with your pencil, and then do the same on the other side of the door.

8. Step 9: Drill the key holes

   Select a drill bit that is a little larger than the key hole, and insert it into your drill.
   
   Remember your drill safety. A Blind locksmith in Norwich isn't any good to anyone.
   
   Drill along one pencil line through to the lock recess. Repeat this on the other side of the door.

9. Step 10: Test the key hole

   Insert the mortice into its recess and check that the key works smoothly.

10. Step 11: Attach the face plate

    You may want to drill small pilot holes for these screws, but in most cases you can just drill them straight in.

11. Step 12: Fit keyhole cover

    Hold the key hole over the key hole and drill it into place. Repeat on the other side of the door.

12. Step 13: Mark the bolt position on the frame

    Turn the key to extend the bolt. Push the door to, and draw around the bolt on the frame.

13. Step 14: Mark the strike plate position

    Measure the distance between the inside edge of the door and the strike plate. Mark this measurement on the door frame. Align the strike plate with the pencil line you have just made. The bolt recess must be positioned according to the marks on the edge of the frame. Draw in and around the strike plate.

14. Step 15: Cut bolt and strike plate recesses

    Remember your chisel safety. Following your marks, chisel out a hole for the bolt. First cut around your pencil outline, then chisel out the recess. Check the fit of the bolt in the recess.
    
    Then chisel out a shallow recess for the strike plate so that it lies flush with the door frame. Be careful not to chisel too deep a recess as this will be hard to undo. Keep testing the pate until it fits snugly.

15. Step 16: Attach the strike plate

    Remember your drill safety. Drill the strike plate into the frame.

16. Step 17: Test

    Now test your handy work. Check that the door closes easily and that the key turns smoothly. You're as good as a locksmith in Norwich.

If You Need A Lock Fitting Locksmith In Norwich, We Are Here To Help

Article taken from Video Jug

Locksmith In Norwich Training

There are several skills that are prerequisites to becoming a professional locksmith in Norwich; excellent manual dexterity, an interest in mechanical and electronic gadgetry, good communications/public relations, maths and possibly some carpentry skills are all assets for a good locksmith in Norwich.

However, to be a locksmith in Norwich is one career that will keep your interest because there is a constant need for Continued Professional Development. This is due to the continuous development of new products; these require new perception and techniques on the part of the locksmith in Norwich. A locksmiths craft is very diverse as there are also many specialist fields; some locksmith in Norwich will have a business that covers some of these fields; some businesses will specialise in one area.

PT Lock & Safe Trained Locksmith In Norwich

Often your local locksmith in Norwich may be able to offer you work as an “apprentice” (although there is no formal apprenticeships in locksmithing). An other way to gain an understanding of the industry is to attend a BLI General Locksmith in Norwich  Course at MLA’s Training Centre.

If You Need A Locksmith In Norwich, We Are Here To Help

Article Taken from The MLA Website

Locksmith Norwich

Number One For Locksmith Norwich

Historically, locksmith in Norwich actually made the entire lock, working for hours hand cutting screws and doing much file-work. Today, the rise of cheap mass production means that this is no longer true, and, though a few expert locksmith in Norwich are also engineers and capable of sophisticated repairs and renovation work, the vast majority of locks are repaired by swapping of parts or like-for-like replacement, or upgraded to modern mass-production items. Until more recently, safes and strongboxes were the exception to this, and to this day large vaults are custom designed and built at great cost, as the cost of this is lower than the very limited scope for mass production would allow, and the risk of a copy being obtained and defeated as practice is removed.

Locksmith Norwich Engineers

Although fitting of keys to replace lost keys to automobiles and homes and the changing of keys for homes and businesses to maintain security are still an important part of locksmithing, locksmith in Norwich today are primarily involved in the installation of higher quality lock-sets and the design, implementation and management of keying and key control systems. Most locksmith in Norwich also do electronic lock servicing, such as making keys for transponder-equipped vehicles and the implementation and application of access control systems protecting individuals and assets for many large institutions.
In terms of physical security, locksmith in Norwich work frequently involves making a determination of the level of risk to an individual or institution and then recommending and implementing appropriate combinations of equipment and policies to create "security layers" which exceed the reasonable gain to an intruder or attacker. The more different security layers are implemented, the more the requirement for additional skills and knowledge and tools to defeat them all. But because each layer comes at an expense to the customer, the application of appropriate levels without exceeding reasonable costs to the customer is often very important and requires a skilled and knowledgeable locksmith in Norwich to determine.

PT Lock & Safe Knowledgeable Locksmith In Norwich

Safe Opening In Norwich

Number One For Safe Opening In Norwich

The combination lock remains the number-one method for securing a safe door. There are a variety of combination locks available. Combination locks for safes are divided into two classifications: Group 1 and Group 2.
Group 2 combination locks are the most common type found on home safes today. They provide one-, two-, or three-number combinations.
Group 1 locks provide a greater degree of protection as they can offer combinations of up to six numbers. These locks are also sturdier, and have more wheels in the lock mechanism. This greatly reduces the probability of even a skilled professional safe Opening in Norwich.
Now, let's take a look at what happens inside a combination lock.
The central lock feature in a combination safe is the wheel pack; a collective set of devices that work together to 'know' the combination. While safe manufactures have come up with several variations on the wheel pack to deter cracking, they are all designed around the same principle to stop the safe opening in Norwich.

A wheel pack

The wheel pack comprises a combination dial that is attached to a spindle. Inside the lock, the spindle runs through several wheels and a drive cam. The number of wheels in a wheel pack is determined by how many numbers are in the combination - one wheel for each number. When you turn the dial, the spindle turns the drive cam. Attached to the drive cam is a drive pin. As the cam turns, the drive pin eventually makes contact with a small tab on the adjacent wheel called the wheel fly.
Each wheel has a wheel fly on each of its sides. The drive pin spins the first wheel until it makes contact with the wheel adjacent to it. This continues until all the wheels are spinning. This is known as picking up the wheels. Each wheel on the spindle has a notch cut into it. When the right combination is dialed, all the wheels and their notches line up perfectly. Which is what safe opening in Norwich engineers will try to do called manipulation.
Resting just above the wheels is the fence. The fence is a small metal bar attached to a lever. The fence prevents the safe door from being opened without the combination being dialed. It does this by resting on the wheels and blocking the path of the bolt that secures the safe door and stopping the safe opening in Norwich.
When all the wheels line up, their notches align to form a gap. The fence falls into this gap under the force of its own weight. With the fence gone, the bolt can slide freely past and the safe can be opened.

PT Lock & Safe Safe Opening Norwich

When all the wheels in the wheel pack are in the correct position, their notches align to form a gap. Under the force of its own weight, the fence falls into the gap allowing the safe to be opened.Though this design is relatively straightforward, it is mighty in its simplicity. The wheel pack design has been used for almost 100 years and still proves difficult to overcome for even the most skilled safecracker. But, it is not fool-proof. In the next Blog we will take a look at the various ways safe Opening in Norwich engineers defeat this design.

Safe Opening Norwich Experts

Article taken from How Stuff Works.

Skill Of A Locksmith In Norwich

Skills Of A Locksmith In Norwich

A locksmith in Norwich should be a highly skilled and adaptable trades person. He must be up to date with all the latest techniques being used by Locksmiths and burglars alike. Without the latest tools and techniques being used by the professional locksmith in Norwich  how can he be expected to open the lock without damage to the door. Likewise how can he recommend security measures if the latest methods being employed by burglars are not understood. One of the biggest assets of a locksmith in Norwich should be his patience and attention to detail, to be able to pick a lock can be likened to completing a complex puzzle. Modern locks contain 5 levers or more and most have anti-pick devices in-built to confuse or defeat the locksmith in Norwich. Not only must you determine the order to pick the levers but whether you have entered one of the anti-pick devices. Knowing the lock you are picking inside out is the best way to solve the puzzle and this can only be achieved with experience.

PT Lock & Safe Skilled Locksmith In Norwich

A lot of time must be dedicated to stripping down and making keys to the different locks on the market, as I have found this to be the best way to really "Learn" a lock. Once this has been completed the locksmith in Norwich must apply this knowledge to defeat the locks and see if he can develop a technique that gives good results. Another skill a locksmith in Norwich should have is good carpentry skills as often they are asked to fit locks to wooden doors, windows or cupboards sometimes in listed buildings, so great care must be taken on installation of these products.. At PT Lock and Safe we place great emphasis on these skill sets to provide you the customer with the best locksmith in Norwich.

If You Need Locksmith In Norwich, We Are Here To Help

Safe Opening In Norwich

Safe Cracking Or Safe Opening In Norwich

In the movies, master thieves and spies can deftly defeat a safe in a matter of seconds using little more than steady hands and a good ear. Safe opening in Norwich isn't really that easy of course, but expert safecrackers really can get through just about any lock mechanism. It's a matter of having the right tools, the right skills and plenty of patience.
In this blog, we'll examine the fundamentals of this rare skill and show you the ins and outs of safe opening in Norwich.
Despite the tried-and-true design of the safe, it contains a fundamental weakness: Every safe must be accessible to a safe openng Norwich locksmith or other authority in the event of a malfunction or lock-out. This weakness forms the basis of safeopening in Norwich.

PT Lock & Safe For Safe Opening In Norwich

In order to understand safe opening in Norwich, you need to first understand the safe and the basic mechanisms that are used to protect it. Safes come in a variety of sizes and shapes that are specified for home or commercial use. Most safes fall into two categories: the fire safe and the burglary safe. The construction of a safe is specific to its intended function. Depending on the owner's needs, a safe may be wall-mounted, set into (and seemingly under) the floor or simply bolted to the ground.
Fire safes are reinforced with fire retardant materials but have little in the way of actual protection against unwanted entry. The typical burglary safe is built to withstand a considerable attack. But due to their reinforced steel frames and iron cladding, the burglary safe tends to act like an oven; effectively cooking the contents when exposed to heat or flame.
The most popular method of safecracking is to simply steal the entire safe and move it to a location where the safecracker has the time and tools to take the safe apart and remove its contents. However, when design or circumstances do not permit this, the safecracker must contend with the locking mechanism. We'll look at the locking mechanism in detail in the next blog. Article taken from HowStuffWorks. More information about Safe Opening Norwich soon.

Need a Safe Opening in Norwich, We Are Here To Help

Key Impressioning Locksmith In Norwich

What is a key impressioning locksmith in Norwich? Well it's not a locksmith in Norwich who impersonates keys, it's a locksmith that makes keys to a lock without taking the lock apart or causing any damage to the lock. How is it done you might ask? Well frstly you need to find the correct key blank for the lock and make sure it enters the keyway. Step two is to blade the key blank, this involves taking a file and making it ready to accept the marks from the lock. Step three is to clamp the key blank into a clamping device such as vise grips or a dedicated key impressioning clamp. Insert the key blank into the lock and apply slight turning pressure whilst tilting the key blank up and down within the keyway of the cylinder lock. If you get everything just right you can just about see faint marks on the bladed key blank. Reading these marks is the real skill of a key impressioning locksmith in Norwich.

PT Lock & Safe, Skilled Locksmith In Norwich

Step four once you have filed where you believe to be the correct marks you go back to step three and continue this process removing small amounts of the key blank at a time until eventually the key turns in the lock. Step five is to duplicate the key you have made onto a new blank as during the impressioning you will have weakened the key and also because it won't look quite right. You may have to file the key you have duplicated to allow it to turn smoothly in the lock. A good locksmith in Norwich should have these skills and the correct tools for completing this type of task. Key impressioning is an ideal way to make keys to locks where it is not possible to easily take the lock apart or the lock may be riveted together or just in accessible. This type of locksmith in Norwich work is used a lot in the auto locksmith industry and also locksmiths in Australia and america use this technique rather than picking locks. PT Lock & Safe staying ahead of the other locksmith in Norwich.

Locksmith In Norwich, We Are Here To Help