Sunday 18 March 2012

Locksmith Attleborough Fichet Bauche

Locksmith Attleborough PT Lock & Safe

Locksmith Attleborough cover lots of different areas of Locksmith Attleborough work. In this post we are going to cover changing the combination on a Fichet Bauche safe. We are probably the only Locksmith Attleborough that know how to do this. To start i will briefly explain the operation of this lock so you may better understand how it works. What other Locksmith Attleborough don't know is that there are two different types of this combination lock. One has four four clicks on the outer dial and twenty on the inner dial the other has seven on the outer dial and again twenty on the inner dial. Lets say we are using the numbers 1-7, 2-5, 3-7, 4-2. The first number refers to the outer dial the second number refers to the inner dial. Locksmith Attleborough need to dial the the outer dial fully to the left ie. to the starting digit 1, then after turning the inner dial full counter clockwise you need to count the clicks (now turning inner dial clockwise) on the inner dial until you reach the desired number. in this case 7. Move the outer dial on one position clockwise to position 2, then rotate inner dial fully counter clockwise and count 5 clicks turning inner dial clockwise. Continue following this sequence until all numbers have been input into the lock and the lock is opened. Most Locksmith Attleborough would have by now worked this out from following these simple instructions.

For a Locksmith Attleborough to change the combination is not that much more difficult

Locksmith Attleborough
For a Locksmith Attleborough to change the combination is not that much more difficult. First the Locksmith Attleborough must remove the plate on the inside of the safe door. Follw the above procedure for Locksmith Attleborough to open lock but before opening safe you will notice that there are little red dots ligned up on the back of the lock. Also in the centre of the lock there is a turn button, This my Locksmith Attleborough friends disengages the the gearing for the lock. Once this has been turned its just a simple case of Locksmith Attleborough dialing in your new numbers and turning the thumbturn back to the original positon to lock the numbers in place. Locksmith Attleborough always lock the safe in the open position then check the lock operates correctly using the new numbers. If you get stuck changing the numbers call a Locksmith Attleborough that knows what he is doing. At PT Lock & Safe (Locksmith Attleborough) we have been trained how to change combinations on Fichet Bauche safes we also know how to open and service these types of unit. So if you need a Locksmith Attleborough contact us.

If you get stuck changing the numbers call a Locksmith Attleborough

No comments: