PT Lock and Safe Locksmith in Kings Lynn

PT Lock and Safe are pleased to announce that we have an approved locksmith in Kings Lynn. So we are now able to offer the same great locksmith in Kings Lynn service that we offer in the other areas. We have always offered this great locksmith in Kings Lynn service for safe opening in Kings Lynn and for other larger locksmith in Kings Lynn work but now we are able to offer the full range of locksmith in Kings Lynn work from simple lock changing to the slightly more complex lock opening service. So if you need a window lock fitted or a UPVC lock repaired or replaced you know you can count on PT Lock & Safe to provide you with a locksmith in Kings Lynn who will provide you with a quality job everytime. How are our engineers different from the rest you may ask, well apart from their superior locksmith in Kings Lynn training it quite often is the small things which make a big difference when your a locksmith in Kings Lynn. Such as alawys using a dust sheet when fitting locks. There is nothing worse than wood shavings stuck in the pile of your carpet. We also carry a Vacuum cleaner on each of our vans to pick up the bits the dust sheet doesn't catch. The door is checked for pencil marks which may have been put on the door during the fitting process, these are then cleaned off, so the door looks as it did when we turned up. Apart from the new lock of course. Another thing we do is remove all of the protective coating placed on the escutcheon covers and face plate of the lock, this doesn't take long to do but you would be surprised how often I work on a lock that was fitted years ago and the plastic cover is still on the lock. Unfortunately when you peel it off after years of being left on there it looks awful. The locksmith in Kings Lynn will then check the door to make sure it opens and closes without binding on the frame, Then the locksmith in Kings Lynn will check the hinge screws to make sure they are tight and not just spinning around. So as you can see we take our locksmith in Kings Lynn jobs very seriously.

We take our Locksmith in Kings Lynn jobs very seriously.

Now lets take a look at the free extras we offer when our locksmith in Kings Lynn works on a UPVC door. If it is a straght European cylinder change or a gear box change or even the full mechanism that needs fitting we still do more than other locksmith in Kings Lynn. The main reason why the locking mechanism breaks is because of poor door alignment. When the door falls out of alignment, usually due to settlement on new builds and wear and tear on hinges on older properties, the gearbox of the lock often ends up lifting the weight of the entire door or pulling the door into the frame so it can lock properly. The geabox has lots of small teeth inside which are not designed to operate with that amount of load on them so eventually the teeth break leaving you with a door that either doesn't lock or doesn't open. Other locksmith in Kings Lynn will replace the lock but not address the alignment issue, whether this due to not having the experience to solve the problem or is it because they know in it will go wrong again in the future and then they get the repeat work. You can be sure that our locksmith in Kings Lynn will deal with the alignment issue, clean the door of all finger marks, check and adjust the hinges and possibly heel and toe the door if required. We are locksmith in Kings Lynn who take pride in doing the job properly.

locksmith in Kings Lynn who take pride in doing the job properly